Parts Search

1. Select a Category
2. Enter Keyword(s)

in 

Shop by Parts Breakdown

1. Select a Category

Browse

Our Spray Heads Are Versatile

mega

 

Advantages and Benefits of Mega Spray Heads

No other company offers a spray head as adjustable as ours. At Mega we understand that every mine and construction site faces its own unique set of challenges, and that no single spray system configuration will work for all applications. To tackle this challenge Mega spray heads are designed to be adjustable enough to meet any spray application requirement.

Only Mega has the depth of experience and staff expertise available to serve our customers that Mega offers. Contact our Mega Product Support Department to see how we can help you improve your water spray applications.

Mega Spray Heads Are Fully Adjustable!

 

SHV adjustment SHV adjusting Ring

Adjustable Base Plate

Mega spray heads can be rotated 360° on their base plate mounts to adjust the horizontal direction of the discharge spray for each individual spray head.

Adjusting Ring

An adjusting ring allows for simple and easy control over the discharge spray flow and fan width.

Vertical Orientation Vertical Orientation

Vertical Orientation

With the spray head set level with the ground, water exits at a 10° upward angle above horizontal, creating a uniform, fully atomized fan of water. In hot and very arid climates, water can be quickly lost to evaporation as it settles onto the hot ground. Optional swivels on spray heads allow them to be tilted downward to concentrate the spray fan onto the ground. This is also useful for flushing and sweeping operations.

Vertical Side Spray

Vertical Side Spray (VSS)

Additionally, Mega offers a Vertical Side Spray (VSS) option for both hydraulic and pneumatic spray heads. With this option, a Mega spray head is mounted vertically on each side of the water tank. The resulting vertical fans of water are ideal for spraying hillsides, piles, berms, and for reinforcing fire-fighting black lines.

 

»top

Spray Pattern Customization

Mega spray heads can be adjusted to create a wide variety of spray patterns through horizontal rotation of the spray head and adjustment of the flow rate and fan width of each individual spray head. This ability to orient and adjust the flow of water from each spray head allows the operator to create the ideal spray pattern for nearly any application.
Full opening SHV

Full Opening

A Mega spray head in the default full (90°) opening setting emits a wide, even fan of fine spray.

Spray Pattern Customization
Normal Opening

Normal Opening

A Mega spray head adjusted to a narrower opening width sprays a more focused stream of water that travels further.

Spray Pattern Customization

»top

Spray Intensity

An adjusting ring allows for simple and easy control over the spray intensity. A 3/8 inch tall opening ("heavy spray" setting) will provide heavy, short-range spray appropriate for ground material that is very sandy or porous, or for extremely hot and dry environments where a heavy lay-down of water is necessary to saturate the ground. The 1/4 inch opening provides a finer, longer-reaching spray ideal for precision watering and water conservation.
Heavy Spray

Heavy Spray

The "heavy" spray head opening is
3/8 inch tall. This setting provides a very heavy spray of water with reduced width and reach.

Spray Intensity
Fine Spray

Fine Spray

The "fine" spray head opening is
1/4 inch tall. This setting results in a finer spray of water with maximum reach and width at high pump speeds. This is the recommended setting for most water distribution applications.

Spray Intensity
   

»top